Digital 8504 Spezifikationen PDF herunterladen

MSD Pro-Billet Digital E-Curve Distributor

Chrysler, 318, 340, 360

PN 8504 - U.S. Patent 6820602

Important: Read these Instructions before attempting the installation.

Parts Included:

1 - Digital E-Curve Distributor

1 - Rotor, PN 8467

1 - Distributor Cap, PN 8433

1 - Wire Retainer

2 - 1.5" Self Tapping Screws

Note: The terminals of this Digital E-Curve Distributor require spark plug style terminals. You

may need to change the terminals and boots of your wires. MSD offers two kits, PN 8849 or

PN 8848 that are supplied with nine boots and terminals.

DIGITAL E-CURVE FUNCTIONS

RPM LIMIT

This distributor is equipped with an adjustable rev limiter. It

is adjustable from 5,000 - 10,000 rpm by a rotary dial under

the cap and rotor (Figure 1). The rpm will not exceed your

selected amount to protect the engine from overrev damage.

TIMING FUNCTIONS

Electronic Advance Curve Operation: The Electronic

Advance Curve is managed by a microprocessor built into

the ignition module. You can program an electronic timing

advance curve by adjusting two rotary switches under the

distributor cap (Figure 1). A magnetic pickup is used as a

trigger device that tells the ignition module when to fire the

coil. The pickup is triggered by a reluctor mounted to the distributor shaft. This means that you

have to set the distributor at the highest, or Total, amount of advance that you want to achieve

(including vacuum advance) and compensate with one of the selectable ignition curves (shown

on page 4). Following are important definitions that will be used to set up your timing.

Electronic Centrifugal Advance: Since this distributor is all electronic, there really is no mechanical or

centrifugal advance. On a standard distributor, this advance would be called centrifugal so it will be

referred to as the electronic centrifugal advance. The chart on page 4 shows all of the different

combinations you can achieve by simply turning the two rotary dials located under the distributor cap.

1 - 3-Pin Harness

1 - O-Ring

1 - Timing Tape Set, PN 8985

WARNING: Before installing the MSD Digital E-Curve Distributor, disconnect the bat-

tery cables. When disconnecting the battery cables, always remove the

Negative (-) cable first and install it last.

MSD IGNITION • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344

Figure 1 Rotary Dial Adjustments.

Timing

Switch 1

Timing Switch 2

Rev

Limiter

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Chrysler, 318, 340, 360

MSD Pro-Billet Digital E-Curve DistributorChrysler, 318, 340, 360PN 8504 - U.S. Patent 6820602Important: Read these Instructions before attempting the

Seite 2 - CHOOSING AN ADVANCE CURVE

2 INSTALLATION INSTRUCTIONSMSD IGNITION • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344Total Timing: This is the

Seite 3 - SETTING UP THE DISTRIBUTOR

INSTALLATION INSTRUCTIONS 3MSD IGNITION • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344As you can see from the ch

Seite 4 - 4 INSTALLATION INSTRUCTIONS

4 INSTALLATION INSTRUCTIONSMSD IGNITION • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344Figure 3 Available Timing

Seite 5 - INSTALLING THE DISTRIBUTOR

INSTALLATION INSTRUCTIONS 5MSD IGNITION • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344Note: When installing the

Seite 6

6 INSTALLATION INSTRUCTIONSMSD IGNITION • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344Figure 6 Wiring the Ready

Seite 7 - INSTALLING THE TIMING TAPE

INSTALLATION INSTRUCTIONS 7MSD IGNITION • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344STARTING AND TUNING TIPS•

Seite 8

MSD IGNITION • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344FRM27044 Created 09/05 Printed In U.S.A.Installation

Kommentare zu diesen Handbüchern

Keine Kommentare

Digital 8504 Spezifikationen

Stöbern Sie online oder laden Sie Spezifikationen nach Digitale Videorecorder (DVR) Digital 8504 herunter. Digital 8504 Specifications Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Videorecorder (DVR) Digital 8504